Introduction and installation of flexible protective net parts - SNS flexible protective net manufacturer

Flexible protection nets have been used in large quantities in recent years. They are mainly used in highway slope protection, reservoir slope treatment, high-speed beautification, and avoiding sediment flow. In these areas, the slope protection net has displayed its unique special features. The advantage is that there is no way to replace other protective net products. Therefore, the progress of slope protection nets has been very rapid in recent years. For those who don’t understand the slope protection net at all, we will introduce you one by one, specific parts and installations.

1. The anchor rod is a very tight part of the flexible protective net. The anchor rod is divided into an upper anchor rod and a lower anchor rod. The national standard product generally uses a multi-strand 16mm steel wire rope as it is deemed appropriate. What kind of anchor rods are used as appropriate, and finally the upper anchor rod must have a tensile strength of 80KN and the lower anchor rod must reach 50KN. The tightness of the anchor rod is directly related to the anti-collision level of the protective net.

2. The support rope is also a tight component part of the flexible protective gateway, which is divided into a horizontal support rope and a longitudinal support rope. The diameter of the horizontal support rope is generally 16mm.

3. The column is the supporting point of the entire child protection. When the falling rock rolls down and touches the protective net, the force of the protective net is evenly distributed, and finally spread to the column. So the tightness of the column is self-evident. Columns are usually treated with hot-dip galvanized surface as deemed appropriate. If the anti-corrosion performance of the column is very poor, it is very easy to corrode when it encounters acid rain, and the corroded column cannot achieve the slope protection effect.

The installation of the flexible protective net usually has drawings. We need to strictly follow the drawings during the construction process. The foundation must be firm at the time of installation of the column, and the column cement should be seamlessly connected to the ground.